درایور استپر موتور TB6600

درایور استپر موتور TB6600 با حداکثر توان  ۱۶۰  وات قادر است اکثر استپ موتورها را درایو کند.

Applicable stepper motor:
۴۲,۵۷,۸۶type 2-phase 4-phase (4-wire line 6 line 8)

۱, ۹V-42V DC power supply;
۲, H – bridge bipolar constant – current driving;
۳, the maximum 4.0A eight selectable output current;
۴, maximum 32 segment six Subdivision optional;
۵, the input signal high-speed optical isolation;
۶, the standard total positive single pulse interface;
۷, offline maintenance function;
۸, semi-enclosed chassis can be adapted to more stringent environment;
۹, to provide energy-saving semi-automatic current lock function;
۱۰, built-in temperature protection and overcurrent protection.

Description of terminal definitions
Signal input
⑴ the CP + : positive pulse signal input terminal.
⑵ CP- : pulse signal input negative terminal.
⑶ the DIR + : the motor is, reverse control of the positive terminal.
⑷ the DIR – : the motor is, reverse control negative terminal.
⑸ EN + : motor off control of the positive terminal.
⑹ EN- : motor off control of the negative terminal.
Motor winding connection:
⑴ A + : Connect the motor windings A + phase.
⑵ A- : Connect the motor windings A- phase.
⑶ B + : Connect the motor winding B + phase.
⑷ B- : Connect the motor winding B- phase.

Operating voltage connection:
⑴ the VCC : Positive DC power supply (Note: 10V  < the VCC  < 4 2V ).
⑵ the GND : DC power supply negative.
Signal input optocoupler isolation connection
There are two input signal interface connection: the user may need to use common anode or common cathode connection.
۱ , common anode connection: respectively, the CP + , the DIR + , EN + is connected to the power supply control system, if the power supply is + 5V  can be connected directly, if the power supply is greater than + 5V , shall be an additional external current limiting resistor R & lt , guaranteed to drive internal optical coupling provides 8-15mA  drive current. Pulse input signal CP- access; In this case, the DIR – , EN- in low effective .
۲ , common cathode connection: respectively CP- , the DIR – , EN- connected to the control system ground terminal ( SGND , isolated from power ground); + 5V  pulse input signal by CP + added; In this case, the DIR + , EN + in high effective . Limiting resistor R  is connected in the same values and common anode connection.

برای اطلاعات بیشتر اینجا  کلیک  کتید.

•   4.5 - 9 V
•   9 - 42 V
•   4 A